Rob(JHB) 083 330 5332

info@stucco.co.za

 

Stucco Grano Floor

 

 

 

 

 

 

 

 

Stucco brush coat

DESCRIPTION
Stucco Brush Coat a wall paint / wall plaster, is a cement based wall coating manufactured in a variety of UV stable natural earthy paint colours, used to coat or paint raw brick wall, plastered brick, face brick,  bagged bricks, cement board, fascia board, textured concrete surfaces, new plaster, natural stones, etc. Internal or external walls will achieve a textured mottled finish.


SURFACE PREPARATION
Prior to application surface substrate must be cleaned thoroughly or free of wall tiles, ceramic tiles, paint, blistered paint, flaky paint, peeling sealers, vinyl tiles, grime, bitumen, dust, dirt, fungal growth, oil and mould to name a few.
It may be applied to non absorbent surfaces such as pva paints etc by applying Stucco Primer Coat prior to doing so.
Remove loose or friable particles with the aid of a wire brush.


MIXING INSTRUCTIONS
Mix 2 parts of powder to 1 part clean water by volume into a clean bucket for +/-5 minutes with a flat paddle or stirrer on low speed, as a guide, resulting in a milky textured mix ensuring all product is dissolved and no dry powder clots remain.
Apply the entire mixed product within 1 hour of mixing stirring occasionally (mix only as much as is needed.eg 10kg batches cleaning buckets and brushes between mixes) +/-1kg = 1m sq.
Do not add more water or powder to the mix after mixing is completed.


APPLICATION
Stucco Brush Coat is a "one coat" application product.
On raw plaster, bricks etc moisten walls lightly prior to application as one would prior to applying plaster onto brick.
Painting a wall use a block brush in vertical strokes from one corner/edge of wall to another corner/edge of wall, keeping a wet edge to continuously add too resulting in no joints or colour breaks.
Do not apply in direct sunlight, rain or if frost is imminent.


PRECAUTIONS
If applied in direct sunlight or windy conditions keep lightly moisten to aid and ensure proper curing.
Do not apply in temperatures of less than 5C or over 30C as well as if frost or rain is eminent for exterior applications for obvious reasons.


 STORAGE
Store only in a cool dry area, 10cms away from walls and floors on wooden slates to prevent condensation occurring within the sealed package.


COVERAGE
Stucco Brush Coat covers an estimated +_ 23 square meters per coat per 25kg bag depending on surface absorption.


DISCLAIMER
As with all trully natural products, shade and tone colour variations may occur .Test product on sample area prior to use as we will not accept any liability in any shape or form for any damages whatsoever as product is used outside of our control.

 

Disclaimer: As with all truly natural products, shade and tone colour variations may occur.